Complete Cylinder
Made from Hardened Stainless Steel
The complete cylinder is a low cost, high quality component widely used in kinematic applications. Two parallel mounted cylinders form a very high quality substitute for the hard-to-manufacture vee groove. These hardened and dimensionally stabilized stainless steel cylinders are precision ground and machine lapped to provide excellent cylindricity with close dimensional tolerance.
The highly uniform low microinch surface texture generated by the machine lapping leads to low hysteresis and excellent repeatability. These complete cylinders can be press fit, shrink fit or glued into mating holes. They can also be clamped in place by a number of different methods. The surface finish is 1 microinch Ra maximum (.0000254 mm). The cylindricity of all cylinders is .000020" (.000508 mm).
| Part # |
A-Diameter, ±.0001" |
B-Length, Reference |
| 187-C |
.1875" ( 4.763 mm ) |
1.5" ( 38.100 mm ) |
| 250-C |
.250" ( 6.35 mm ) |
1.5" ( 38.100 mm ) |
| 312-C |
.3125" ( 7.9375 mm ) |
1.5" ( 38.100 mm ) |
| 375-C |
.3750" ( 9.525 mm ) |
1.5" ( 38.100 mm ) |
| 500-C |
.500'' ( 12.700 mm ) |
1.5" ( 38.100 mm ) |
| 625-C |
.625" ( 15.875 mm ) |
1.5" ( 38.100 mm ) |
| 750-C |
.750" ( 19.05 mm ) |
1.5" ( 38.100 mm ) |
| 100-C |
1.00" ( 25.4 mm ) |
1.5" ( 38.100 mm ) |
See here for Kinematic Cylinders prices.